OBD-II CAN Bus GPS Arduino Development Kit開發套件

  • 上市日期: 2019-12-18
  • 售價: $1,100
  • 貨號: 17000000383

立即出貨 (庫存=1)

  • OBD-II CAN Bus GPS Arduino Development Kit開發套件-preview-1
  • OBD-II CAN Bus GPS Arduino Development Kit開發套件-preview-2
  • OBD-II CAN Bus GPS Arduino Development Kit開發套件-preview-3
  • OBD-II CAN Bus GPS Arduino Development Kit開發套件-preview-4
OBD-II CAN Bus GPS Arduino Development Kit開發套件-preview-1

相關主題

商品描述

The development kit allows you to access your vehicle’s CAN bus via the OBD-II connector. The development kit can be connected (plugged) to your vehicle’s OBD-II port (On-Board Diagnostics port). The base board of the development kit is integrated with an Atmega32U4 microprocessor. 

The CAN-Bus library is available to write sketches using Arduino IDE to send and receive messages from the CAN bus network and also allows you to fetch useful data from the messages. The output data can be taken through the USB Type-C port or you can store them to a microSD card (TF card) by inserting to the microSD slot.   

The main board in the kit is based on MCP2551 CAN transceiver and MCP2515 CAN receiver, which provides baud rate from 5kb/s to 1Mb/s. 

A NEO-6 GPS breakout is seated on the base board allows you to track your vehicle with this fantastic small module by logging the GPS data to a microSD card. 

Features

  • Male OBD-II connector
  • Easy-to-use Arduino library
  • Integrated ATmega32U4 – 8-bit AVR microcontroller
  • NEO-6 GPS breakout
  • Integrated microSD card (or TF card) slot
  • USB Type-C port for output
  • Supports up to 115200 UART baud rate (default 9600)
  • Supports up to 1Mb/s CAN Bus baud rate
  • LED indicators for TX and RX

Part List

  • OBD Ⅱ Slaver(Base board) x 1
  • GPS Board x 1
  • Plastic Case x 1
  • ​​​​​​​Screw Driver x 1

Specifications

Parameter Value
MCU Atmega32U4
(with Arduino Leonardo bootloader)
Clock Speed 16MHz
Flash Memory 32KB
SRAM 2.5KB
EERROM 1KB
Operate Voltage 5V
Input Interface OBD-II
Output Interface USB Type C

Part List

  • OBD Ⅱ Slaver(Base board) x 1
  • GPS Board x 1
  • Plastic Case x 1
  • ​​​​​​​Screw Driver x 1

商品保固卡

1. 開放性電子開發板或模組未經人為破壞或焊接,可享有自購買日起一個月的保固。

2. 樹莓派主板及帶外殼密封商品可享有自購買日起一年的保固。

3. 購買後若有商品品質問題,一律透過sales@makehub.tw連繫確認是否可退換貨,不可直接透過經銷商處理。

4. 保固卡隨商品包裝。

5. 請務必保留經銷商提供的實體/電子發票以作購買證明。