High-Power Piezoelectrics and Loss Mechanisms
暫譯: 高功率壓電材料與損耗機制

Uchino, Kenji

High-Power Piezoelectrics and Loss Mechanisms
  • 出版商: CRC
  • 出版日期: 2020-09-10
  • 售價: $3,630
  • 貴賓價: 9.5 折 $3,449
  • 語言: 英文
  • 頁數: 358
  • 裝訂: Hardcover - also called cloth, retail trade, or trade
  • ISBN: 036754069X
  • ISBN-13: 9780367540692

    • 海外代購書籍(需單獨結帳)

相關主題

商品描述

As one of the pioneers of "Piezoelectric Actuators", I have contributed to the commercialization of various products for over 45 years, including million-selling devices, micro-ultrasonic motors for smart-phone camera modules by Samsung Electromechanics, piezoelectric transformers for backlight inverters by Apple laptops, multilayer PZT actuators for diesel injection valves by Denso Corporation, and piezoelectric energy harvesting modules for Programable Air-Burst Munition by the US Army. During the development period for "piezoelectric actuators and transformers," I found that the bottleneck for device miniaturization was heat generation under a high-power drive condition. Thus, in parallel to the piezo-actuator developments, I have been developing various high-power density piezo-ceramic materials with the loss mechanism clarification. Hence, I considered that it was time to organize a textbook based on the previous studies, including my materials development philosophy to stimulate younger generations to reach to the energy density of up to 100 W/cm3 in the future. Increasing efficiency and saving energy and space (compactness) are one of the important approaches in this 21st-century "sustainable society."

High-Power Piezoelectrics and Loss Mechanisims introduces the theoretical background of piezoelectrics, electromechanical phenomenology, loss mechanisms, practical materials, device designs, drive and characterization techniques, and typical applications, and looks forward to the future perspectives in this field. This book is NOT an overall review of this area, but it focuses on important and basic ideas under my development philosophy to understand how to design and develop high-power piezoelectric materials and devices.

This textbook is designed for self-learning by the reader aided by the availability of:

- Chapter Essentials - Summary for quick memory recovery

- Check Points - Answers are provided in the Appendix

- Example Problems - To enhance the reader's understanding with full, detailed solutions

- Chapter Problems - For the final exam or further consideration

商品描述(中文翻譯)

作為「壓電致動器」的先驅之一，我在過去45年中為各種產品的商業化做出了貢獻，包括銷售量達百萬的設備、三星電子機械的智慧型手機相機模組用微超聲波馬達、蘋果筆記型電腦的背光逆變器用壓電變壓器、電裝公司（Denso Corporation）為柴油噴射閥設計的多層PZT致動器，以及美國陸軍的可編程空爆彈用壓電能量收集模組。在「壓電致動器和變壓器」的開發期間，我發現設備小型化的瓶頸在於高功率驅動條件下的熱量產生。因此，在壓電致動器的開發過程中，我也在開發各種高功率密度的壓電陶瓷材料，並釐清其損耗機制。因此，我認為是時候根據之前的研究組織一本教科書，包括我的材料開發理念，以激勵年輕一代在未來達到高達100 W/cm³的能量密度。提高效率、節省能源和空間（緊湊性）是21世紀「可持續社會」中的重要方法之一。

《高功率壓電材料與損耗機制》介紹了壓電材料的理論背景、電機現象學、損耗機制、實用材料、設備設計、驅動和特性測試技術以及典型應用，並展望該領域的未來前景。本書並不是該領域的全面回顧，而是專注於我開發理念下的重要和基本概念，以理解如何設計和開發高功率壓電材料和設備。

本教科書旨在幫助讀者自學，並提供以下資源：

- 章節要點 - 快速記憶回顧的摘要
- 檢查點 - 附錄中提供答案
- 示例問題 - 以完整、詳細的解答增強讀者的理解
- 章節問題 - 用於期末考試或進一步考慮

作者簡介

Kenji Uchino, one of the pioneers in piezoelectric actuators and electro-optic displays, is the Director of International Center for Actuators and Transducers (ICAT) and Professor of Electrical Engineering and Materials Science & Engineering, also currently a Distinguished Honors Faculty at Schreyer Honors College at the Pennsylvania State University. He has been a university professor for 45 years so far, including 18 years in Japanese universities. He has also been a company executive (president or vice president) for 21 years in four companies, most recently the Founder and Senior Vice President of Micromechatronics Inc., a spin-off company from the above ICAT, where he was elaborating to commercialize the ICAT-invented piezo-actuators
and transducers.

作者簡介(中文翻譯)

健二內野（Kenji Uchino）是壓電致動器和電光顯示技術的先驅之一，現任國際致動器與傳感器中心（International Center for Actuators and Transducers, ICAT）主任，以及電機工程與材料科學與工程的教授，同時也是賓夕法尼亞州立大學施瑞耶榮譽學院（Schreyer Honors College）的傑出榮譽教師。他至今已擔任大學教授45年，其中包括在日本大學的18年。他還曾在四家公司擔任公司高管（總裁或副總裁）21年，最近擔任微機電技術公司（Micromechatronics Inc.）的創始人及高級副總裁，該公司是上述ICAT的衍生公司，他在那裡專注於商業化ICAT發明的壓電致動器和傳感器。

類似商品