Wireless Transceiver Design: Mastering the Design of Modern Wireless Equipment and Systems (Hardcover) (無線收發器設計:掌握現代無線設備與系統的設計)

Ariel Luzzatto, Gadi Shirazi

買這商品的人也買了...

相關主題

商品描述

Description

The insatiable demand for high-speed real-time computer connectivity anywhere, any time, fuelled by the wide-spreading acceptance of Internet Protocol, has accelerated the birth of a large number of wireless data networks. Wireless Transceiver Design provides a comprehensive, practical, self-contained and friendly guide to theoretical and practical modern wireless modem & transceiver design for experienced radio and communication engineers and students.
This book will enable readers to fully understand the specifications that characterize the performance of modern wireless modems and transceivers as a whole system, learn how to measure each one of them, and discover how they depend on (one or more) components and subsystems in the various architectures of widespread use. It discusses the important figures related to off-the-shelf radio-frequency and baseband super-components and explains how to measure them to fully evaluate applicability and limitations.

Key Features:

*Readers will learn to master the design, analysis and measurement of important and hard-to-achieve parameters, such as phase noise of oscillators, peak-to-average and linearity of radio-frequency power amplifiers, amplitude and phase balance of quadrature channels and radiated spurious emission
*Written so that each chapter is self contained and suitable to be consulted on an ad-hoc basis as a reference
*The lesser covered topic of ‘parasitic phenomena’, the cause of many major after-market disasters, is addressed
*The material is treated with in-depth mathematical approach, whilst avoiding unnecessarily obscure discussions

Suitable as the basis for advanced under-graduate and post-graduate engineering courses, as well as a comprehensive reference, this book will be of interest to those involved in R&D in the fields of engineering and computer sciences, radio engineers working on cellular products and system engineers in the wireless arena, as well as professors and lecturers in the field of communications, undergraduate and post-graduate students in engineering, computer sciences and system engineering.

 
 

 

Table of Contents

Preface.

About the Authors.

Abbreviations.

1 Modern Transceiver Architectures.

1.1 Overview.

1.2 Receiver Architectures.

1.3 Transmitter Architectures.

1.4 Transceiver Architectures.

2 Receiving Systems.

2.1 Sensitivity.

2.2 Co-Channel Rejection.

2.3 Selectivity.

2.4 Intermodulation Rejection.

2.5 Half-IF Rejection.

2.6 Image Rejection.

2.7 Second-Order Distortion Rejection.

2.8 Blocking.

2.9 Dynamic Range.

2.10 Duplex Desense.

2.11 Duplex-Image Rejection.

2.12 Half-Duplex Spur.

2.13 Phantom-Duplex Spurs.

2.14 Conducted and Radiated Spurs.

3 Transmitting Systems.

3.1 Peak-to-Average Power Ratio (PAPR).

3.2 Effects of Nonlinearity in RF Power Amplifiers.

3.3 Characterization of PA Nonlinearity.

3.4 PA Efficiency.

3.5 Transmitter Transients.

3.6 Conducted and Radiated Emission.

3.7 Enhancement Techniques.

4 Synthesizers.

4.1 Synthesizer Architectures.

4.2 Fractional-N Outlook.

4.3 Fractional-N Theory.

4.4 Multi Stage Noise Shaping (MASH) Architecture.

4.5 MASH Noise Analysis.

4.6 Analog Sigma-Delta A/D Converter.

4.7 Review of PLL Fundamentals.

4.8 Extension of PLL Fundamentals to Fractional-N.

4.9 Measurement of Synthesizers.

5 Oscillators.

5.1 Low-Power Self-Limiting Oscillators.

5.2 Feedback Network Design.

5.3 Noisy Oscillator – Leeson’s Equation.

5.4 Bipolar Oscillators.

5.5 Crystal Oscillators.

5.6 Measurement of Crystal Parameters.

5.7 Measurement of Oscillators.

5.8 Lumped Equivalent of Distributed Resonators.

5.9 Harmonic Oscillators.

5.10 A Unified Approach to Oscillator Design.

6 Parasitic and Nonlinear Phenomena.

6.1 Parasitic Effects in Oscillators and Synthesizers.

6.2 Intercept Point and Spurious Responses.

6.3 Parasitic Effects in Transmitters.

6.4 Parasitic Effects in Receivers.

6.5 Specific Absorption Rate (SAR).

Bibliography.

Index.

商品描述(中文翻譯)

描述

無線收發器設計提供了一個全面、實用、自包含且友好的指南,用於經驗豐富的無線電和通信工程師以及學生的理論和實踐現代無線調制解調器和收發器設計。這本書將使讀者完全理解表徵現代無線調制解調器和收發器性能的規格,學習如何測量每個規格,並發現它們如何依賴於各種廣泛使用的組件和子系統的架構。它討論了與現成的射頻和基頻超級組件相關的重要數據,並解釋如何測量它們以充分評估適用性和限制。

主要特點:

*讀者將學習掌握設計、分析和測量重要且難以實現的參數,例如振盪器的相位噪聲、射頻功率放大器的峰值-平均值和線性度、正交通道的幅度和相位平衡以及輻射的雜散發射
*每章都是自包含的,適合作為參考書隨時查閱
*涵蓋較少的“寄生現象”主題,這是許多重大售後災難的原因
*以深入的數學方法處理材料,同時避免不必要的晦澀討論

這本書適用於高級本科和研究生工程課程的基礎,也是一本全面的參考書,對從事工程和計算機科學研發、從事蜂窩產品的無線電工程師和無線領域的系統工程師,以及通信領域的教授和講師,以及工程、計算機科學和系統工程的本科和研究生學生都感興趣。

目錄

前言
關於作者
縮寫
1 現代收發器架構
1.1 概述
1.2 接收機架構
1.3 發射機架構
1.4 收發器架構
2 接收系統
2.1 靈敏度
2.2 同頻道抑制
2.3 選擇性
2.4 互調抑制
2.5 半中頻抑制
2.6 鏡像抑制
2.7 二階失真抑制
2.8 阻塞
2.9 動態範圍
2.10 雙工失真
2.11 雙工-鏡像抑制
2.12 半雙工雜散
2.13 幻影雙工雜散
2.14 導電和輻射雜散
3 發射系統
3.1 峰值-平均功率比(PAPR)
3.2 射頻功率放大器的非線性效應
3.3 PA非線性的特性
3.4 PA效率
3.5 發射機瞬態
3.6 導電和輻射發射