CCNA Routing and Switching 200-125 Network Simulator

CCNA Routing and Switching interactive learning:

• More than 250 labs

• More than 5,000 hands-on tasks

Four Kinds of Labs:

• Skill Builders

• Subnetting Exercises

• Configuration Scenarios

• Troubleshooting Scenarios

The CCNA Routing and Switching 200-125 Network Simulator is a single-user software package. It helps users develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab

hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 400 structured labs designed to help you learn by doing, the most effective method of learning.

Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA exam. Unlike other simulators on the market, the lab scenarios included in the CCNA R&S 200-125 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.

Master the hands-on skills needed to succeed on the CCNA exam, including:

• Router and switch navigation and administration

• Ethernet LAN switches

• VLANs, trunking, and switch security

• Connected and static routes

• RIPv2 configuration and verification

• Access Control Lists (ACL)

• NAT, syslog, and NTP configuration

• IPv4 and IPv6 addressing and subnetting

• Network troubleshooting

• STP and VTP

• OSPF and EIGRP on IPv4 and IPv6

• External BGP

• Point-to-point WANs and private WANs

• HSRP

• Network management

Skill Builders:

These 250+ labs are narrowly focused, enabling you to practice your configuration skills on a single topic.  Coverage includes: 

• Router and switch CLI navigation

• Configuring IP addresses and DHCP

servers

• VLAN and trunking configuration

• Switch security

• STP, VTP, Portfast, and BPDU guard configuration

• Static and dynamic EtherChannel

• Serial configuration and authentication

• Connected, static, and default routes

• RIPv2, OSPF, and EIGRP configuration

• eBGP and MPLS

• ACL analysis and configuration

• NAT configuration

• Syslog, NTP, HSRP, GRE tunnels, SNMP, IP SLA, and SPAN

Subnetting Exercises:

These 80 labs help you to perform subnetting calculations quickly and accurately, a critical skill for success on the CCNA exam. Topics covered include:

• IPv4 and IPv6 subnet ID calculation

• IP address rejection

• IP route selection

• VLSM overlaps

• IPv6 EUI-64 calculation

• Selecting VLSM routes

Configuration Scenarios:

These 50+ labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills

to the test. Topics covered include:

• Network fundamentals and administration

• IP addressing

• STP and VTP

• Static and default routing

• Serial link configuration

• RIPv2, OSPF, and EIGRP 

• Router-on-a-stick to MLS

• Standard and extended ACLs

• NAT configuration

• HSRP

Troubleshooting Scenarios:

These 30 labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and realistic scenarios that truly test

your ability to perform the job of a network engineer. Topics covered include:

• Switch forwarding

• VLAN troubleshooting

• Path analysis and troubleshooting

• Port security

• STP

• Network discovery

• IP addressing and routing

• DHCP server troubleshooting

• NAT

• EIGRP and OSPF

• IPv6, MLS, and GRE tunnels

• Router-on-a-stick

System requirements:

Windows system requirements (minimum):

• Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)

• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor

• 1 GB RAM (32-bit) or 2 GB RAM (64-bit)

• 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

• DirectX 9 graphics device with WDDM 1.0 or higher driver

• Adobe Acrobat Reader version 8 and above

Mac system requirements (minimum):

• macOS 10.12, 10.11, or 10.10

• Intel core Duo 1.83 GHz

• 512 MB RAM (1 GB recommended)

• 1.5 GB hard disk space

• 32-bit color depth at 1024x768 resolution

• Adobe Acrobat Reader version 8 and above

CCNA路由和交換互動式學習：
• 超過250個實驗室
• 超過5,000個實踐任務

四種實驗室：
• 技能構建者
• 子網劃分練習
• 配置場景
• 故障排除場景

CCNA路由和交換200-125網絡模擬器是一個單用戶軟件包。它幫助用戶在不投資昂貴實驗室硬件的情況下開發和提高實踐配置和故障排除技能。這款先進的互動式模擬軟件使您能夠通過400多個結構化實驗室來練習網絡技能，這是最有效的學習方法。

在每個實驗室中執行時，您將體驗到真實的網絡設備響應，其中包括詳細的指令、拓撲圖、批判性思考問題、提示和答案。通過這些實驗室的學習，您將迅速熟練掌握CCNA考試中常見的Cisco IOS 15版本路由器和交換機命令。與市場上其他模擬器不同，CCNA R&S 200-125網絡模擬器中包含的實驗室場景更加複雜，挑戰您學習如何執行真實世界的網絡配置和故障排除任務。

掌握在CCNA考試中成功所需的實踐技能，包括：
• 路由器和交換機導航和管理
• 以太網局域網交換機
• VLAN、干道和交換機安全性
• 連接和靜態路由
• RIPv2配置和驗證
• 存取控制列表（ACL）
• NAT、syslog和NTP配置
• IPv4和IPv6地址和子網劃分
• 網絡故障排除
• STP和VTP
• OSPF和EIGRP在IPv4和IPv6上
• 外部BGP
• 點對點廣域網和私有廣域網
• HSRP
• 網絡管理

技能構建者：
這些250多個實驗室專注於狹窄的範圍，使您能夠在單一主題上練習配置技能。涵蓋的內容包括：
• 路由器和交換機CLI導航
• 配置IP地址和DHCP服務器
• VLAN和干道配置
• 交換機安全性
• STP、VTP、Portfast和BPDU保護配置
• 靜態和動態EtherChannel
• 串行配置和驗證
• 連接、靜態和默認路由
• RIPv2、OSPF和EIGRP配置
• eBGP和MPLS
• ACL分析和配置
• NAT配置
• syslog、NTP、HSRP、GRE隧道、SNMP、IP SLA和SPAN

子網劃分練習：
這80個實驗室幫助您快速而準確地執行子網劃分計算，這是CCNA考試成功的關鍵技能。涵蓋的主題包括：