LAN Switch Security: What Hackers Know About Your Switches

Eric Vyncke, Christopher Paggen

  • 出版商: Cisco Press
  • 出版日期: 2007-09-01
  • 售價: $2,680
  • 貴賓價: 9.5$2,546
  • 語言: 英文
  • 頁數: 360
  • 裝訂: Paperback
  • ISBN: 1587052563
  • ISBN-13: 9781587052569
  • 相關分類: 資訊安全駭客 Hack
  • 海外代購書籍(需單獨結帳)

買這商品的人也買了...

相關主題

商品描述

Description

LAN Switch Security: What Hackers Know About Your Switches


A practical guide to hardening Layer 2 devices and stopping campus network attacks


Eric Vyncke

Christopher Paggen, CCIE® No. 2659


Contrary to popular belief, Ethernet switches are not inherently secure. Security vulnerabilities in Ethernet switches are multiple: from the switch implementation, to control plane protocols (Spanning Tree Protocol [STP], Cisco® Discovery Protocol [CDP], and so on) and data plane protocols, such as Address Routing Protocol (ARP) or Dynamic Host Configuration Protocol (DHCP). LAN Switch Security explains all the vulnerabilities in a network infrastructure related to Ethernet switches. Further, this book shows you how to configure a switch to prevent or to mitigate attacks based on those vulnerabilities. This book also includes a section on how to use an Ethernet switch to increase the security of a network and prevent future attacks.


Divided into four parts, LAN Switch Security provides you with steps you can take to ensure the integrity of both voice and data traffic traveling over Layer 2 devices. Part I covers vulnerabilities in Layer 2 protocols and how to configure switches to prevent attacks against those vulnerabilities. Part II addresses denial-of-service (DoS) attacks on an Ethernet switch and shows how those attacks can be mitigated. Part III shows how a switch can actually augment the security of a network through the utilization of wirespeed access control list (ACL) processing and IEEE 802.1x for user authentication and authorization. Part IV examines future developments from the LinkSec working group at the IEEE. For all parts, most of the content is vendor independent and is useful for all network architects deploying Ethernet switches.


After reading this book, you will have an in-depth understanding of LAN security and be prepared to plug the security holes that exist in a great number of campus networks.


Eric Vyncke has a master’s degree in computer science engineering from the University of Liège in Belgium. Since 1997, Eric has worked as a Distinguished Consulting Engineer for Cisco, where he is a technical consultant for security covering Europe. His area of expertise for 20 years has been mainly security from Layer 2 to applications. He is also guest professor at Belgian universities for security seminars.


Christopher Paggen, CCIE® No. 2659, obtained a degree in computer science from IESSL in Liège (Belgium) and a master’s degree in economics from University of Mons-Hainaut (UMH) in Belgium. He has been with Cisco since 1996 where he has held various positions in the fields of LAN switching and security, either as pre-sales support, post-sales support, network design engineer, or technical advisor to various engineering teams. Christopher is a frequent speaker at events, such as Networkers, and has filed several U.S. patents in the security area.


Contributing Authors:

Jason Frazier is a technical leader in the Technology Systems Engineering group for Cisco.

Steinthor Bjarnason is a consulting engineer for Cisco.

Ken Hook is a switch security solution manager for Cisco.

Rajesh Bhandari is a technical leader and a network security solutions architect for Cisco.


  • Use port security to protect against CAM attacks

  • Prevent spanning-tree attacks

  • Isolate VLANs with proper configuration techniques

  • Protect against rogue DHCP servers

  • Block ARP snooping

  • Prevent IPv6 neighbor discovery and router solicitation exploitation

  • Identify Power over Ethernet vulnerabilities

  • Mitigate risks from HSRP and VRPP

  • Stop information leaks with CDP, PaGP, VTP, CGMP and other Cisco ancillary protocols

  • Understand and prevent DoS attacks against switches

  • Enforce simple wirespeed security policies with ACLs

  • Implement user authentication on a port base with IEEE 802.1x

  • Use new IEEE protocols to encrypt all Ethernet frames at wirespeed.


This security book is part of the Cisco Press® Networking Technology Series. Security titles from Cisco Press help networking professionals secure critical data and resources, prevent and mitigate network attacks, and build end-to-end self-defending networks.


Category: Cisco Press—Security

Covers: Ethernet Switch Security


$60.00 USA / $69.00 CAN

LAN Switch Security: What Hackers Know About Your Switches


A practical guide to hardening Layer 2 devices and stopping campus network attacks


Eric Vyncke

Christopher Paggen, CCIE® No. 2659


Contrary to popular belief, Ethernet switches are not inherently secure. Security vulnerabilities in Ethernet switches are multiple: from the switch implementation, to control plane protocols (Spanning Tree Protocol [STP], Cisco® Discovery Protocol [CDP], and so on) and data plane protocols, such as Address Routing Protocol (ARP) or Dynamic Host Configuration Protocol (DHCP). LAN Switch Security explains all the vulnerabilities in a network infrastructure related to Ethernet switches. Further, this book shows you how to configure a switch to prevent or to mitigate attacks based on those vulnerabilities. This book also includes a section on how to use an Ethernet switch to increase the security of a network and prevent future attacks.


Divided into four parts, LAN Switch Security provides you with steps you can take to ensure the integrity of both voice and data traffic traveling over Layer 2 devices. Part I covers vulnerabilities in Layer 2 protocols and how to configure switches to prevent attacks against those vulnerabilities. Part II addresses denial-of-service (DoS) attacks on an Ethernet switch and shows how those attacks can be mitigated. Part III shows how a switch can actually augment the security of a network through the utilization of wirespeed access control list (ACL) processing and IEEE 802.1x for user authentication and authorization. Part IV examines future developments from the LinkSec working group at the IEEE. For all parts, most of the content is vendor independent and is useful for all network architects deploying Ethernet switches.


After reading this book, you will have an in-depth understanding of LAN security and be prepared to plug the security holes that exist in a great number of campus networks.


Eric Vyncke has a master’s degree in computer science engineering from the University of Liège in Belgium. Since 1997, Eric has worked as a Distinguished Consulting Engineer for Cisco, where he is a technical consultant for security covering Europe. His area of expertise for 20 years has been mainly security from Layer 2 to applications. He is also guest professor at Belgian universities for security seminars.


Christopher Paggen, CCIE® No. 2659, obtained a degree in computer science from IESSL in Liège (Belgium) and a master’s degree in economics from University of Mons-Hainaut (UMH) in Belgium. He has been with Cisco since 1996 where he has held various positions in the fields of LAN switching and security, either as pre-sales support, post-sales support, network design engineer, or technical advisor to various engineering teams. Christopher is a frequent speaker at events, such as Networkers, and has filed several U.S. patents in the security area.


Contributing Authors:

Jason Frazier is a technical leader in the Technology Systems Engineering group for Cisco.

Steinthor Bjarnason is a consulting engineer for Cisco.

Ken Hook is a switch security solution manager for Cisco.

Rajesh Bhandari is a technical leader and a network security solutions architect for Cisco.


  • Use port security to protect against CAM attacks

  • Prevent spanning-tree attacks

  • Isolate VLANs with proper configuration techniques

  • Protect against rogue DHCP servers

  • Block ARP snooping

  • Prevent IPv6 neighbor discovery and router solicitation exploitation

  • Identify Power over Ethernet vulnerabilities

  • Mitigate risks from HSRP and VRPP

 

Table of Contents

Introduction xix

Part I

Vulnerabilities and Mitigation Techniques 3

Chapter 1

Introduction to Security 5

Security Triad 5

Confidentiality 6

Integrity 7

Availability 8

Reverse Security Triad 8

Risk Management 8

Risk Analysis 9

Risk Control 10

Access Control and Identity Management 10

Cryptography 11

Symmetric Cryptosystems 13

Symmetric Encryption 13

Hashing Functions 13

Hash Message Authentication Code 14

Asymmetric Cryptosystems 15

Confidentiality with Asymmetric Cryptosystems 16

Integrity and Authentication with Asymmetric Cryptosystems 17

Key Distribution and Certificates 18

Attacks Against Cryptosystems 19

Summary 21

References 21

Chapter 2

Defeating a Learning Bridge’s Forwarding Process 23

Back to Basics: Ethernet Switching 101 23

Ethernet Frame Formats 23

Learning Bridge 24

Consequences of Excessive Flooding 26

Exploiting the Bridging Table: MAC Flooding Attacks 27

Forcing an Excessive Flooding Condition 28

Introducing the macof Tool 30

MAC Flooding Alternative: MAC Spoofing Attacks 34

Not Just Theory 35

Preventing MAC Flooding and Spoofing Attacks 36

Detecting MAC Activity 36

Port Security 37

Unknown Unicast Flooding Protection 39

Summary 40

References 41

Chapter 3

Attacking the Spanning Tree Protocol 43

Introducing Spanning Tree Protocol 43

Types of STP 46

Understanding 802.1D and 802.1Q Common STP 46

Understanding 802.1w Rapid STP 46

Understanding 802.1s Multiple STP 47

STP Operation: More Details 47

Let the Games Begin! 53

Attack 1: Taking Over the Root Bridge 55

Root Guard 58

BPDU-Guard 58

Attack 2: DoS Using a Flood of Config BPDUs 60

BPDU-Guard 62

BPDU Filtering 62

Layer 2 PDU Rate Limiter 63

Attack 3: DoS Using a Flood of Config BPDUs 63

Attack 4: Simulating a Dual-Homed Switch 63

Summary 64

References 65

Chapter 4

Are VLANS Safe? 67

IEEE 802.1Q Overview 67

Frame Classification 68

Go Native 69

Attack of the 802.1Q Tag Stack 71

Understanding Cisco Dynamic Trunking Protocol 76

Crafting a DTP Attack 76

Countermeasures to DTP Attacks 80

Understanding Cisco VTP 80

VTP Vulnerabilities 81

Summary 82

References 82

Chapter 5

Leveraging DHCP Weaknesses 85

DHCP Overview 85

Attacks Against DHCP 89

DHCP Scope Exhaustion: DoS Attack Against DHCP 89

Yensinia 89

Gobbler 90

Hijacking Traffic Using DHCP Rogue Servers 92

Countermeasures to DHCP Exhaustion Attacks 93

Port Security 94

Introducing DHCP Snooping 96

Rate-Limiting DHCP Messages per Port 97

DHCP Message Validation 97

DHCP Snooping with Option 82 99

Tips for Deploying DHCP Snooping 99

Tips for Switches That Do Not Support DHCP Snooping 100

DHCP Snooping Against IP/MAC Spoofing Attacks 100

Summary 103

References 103

Chapter 6

Exploiting IPv4 ARP 105

Back to ARP Basics 105

Normal ARP Behavior 105

Gratuitous ARP 107

Risk Analysis for ARP 108

ARP Spoofing Attack 108

Elements of an ARP Spoofing Attack 109

Mounting an ARP Spoofing Attack 111

Mitigating an ARP Spoofing Attack 112

Dynamic ARP Inspection 112

DAI in Cisco IOS 112

DAI in CatOS 115

Protecting the Hosts 115

Intrusion Detection 116

Mitigating Other ARP Vulnerabilities 117

Summary 118

References 118

Chapter 7

Exploiting IPv6 Neighbor Discovery and Router Advertisement 121

Introduction to IPv6 121

Motivation for IPv6 121

What Does IPv6 Change? 122

Neighbor Discovery 126

Stateless Configuration with Router Advertisement 127

Analyzing Risk for ND and Stateless Configuration 129

Mitigating ND and RA Attacks 130

In Hosts 130

In Switches 130

Here Comes Secure ND 131

What Is SEND? 131

Implementation 133

Challenges 133

Summary 133

References 133

Chapter 8

What About Power over Ethernet? 135

Introduction to PoE 135

How PoE Works 136

Detection Mechanism 136

Powering Mechanism 138

Risk Analysis for PoE 139

Types of Attacks 139

Mitigating Attacks 140

Defending Against Power Gobbling 140

Defending Against Power-Changing Attacks 141

Defending Against Shutdown Attacks 141

Defending Against Burning Attacks 142

Summary 143

References 143

Chapter 9

Is HSRP Resilient? 145

HSRP Mechanics 145

Digging into HSRP 147

Attacking HSRP 148

DoS Attack 149

Man-in-the-Middle Attack 150

Information Leakage 151

Mitigating HSRP Attacks 151

Using Strong Authentication 151

Relying on Network Infrastructure 153

Summary 155

References 155

Chapter 10

Can We Bring VRRP Down? 157

Discovering VRRP 157

Diving Deep into VRRP 159

Risk Analysis for VRRP 161

Mitigating VRRP Attacks 161

Using Strong Authentication 162

Relying on the Network Infrastructure 162

Summary 163

References 163

Chapter 11

Information Leaks with Cisco Ancillary Protocols 165

Cisco Discovery Protocol 165

Diving Deep into CDP 165

CDP Risk Analysis 167

CDP Risk Mitigation 169

IEEE Link Layer Discovery Protocol 169

VLAN Trunking Protocol 170

VTP Risk Analysis 172

VTP Risk Mitigation 173

Link Aggregation Protocols 174

Risk Analysis 176

Risk Mitigation 177

Summary 178

References 178

Part II

How Can a Switch Sustain a Denial of Service Attack? 181

Chapter 12

Introduction to Denial of Service Attacks 183

How Does a DoS Attack Differ from a DDoS Attack? 183

Initiating a DDoS Attack 184

Zombie 184

Botnet 185

DoS and DDoS Attacks 186

Attacking the Infrastructure 186

Common Flooding Attacks 187

Mitigating Attacks on Services 187

Attacking LAN Switches Using DoS and DDoS Attacks 188

Anatomy of a Switch 188

Three Planes 189

Data Plane 189

Control Plane 190

Management Plane 190

Attacking the Switch 190

Data Plane Attacks 192

Control Plane Attacks 192

Management Plane Attacks 193

Switch Architecture Attacks 193

Summary 194

Reference 194

Chapter 13

Control Plane Policing 197

Which Services Reside on the Control Plane? 198

Securing the Control Plane on a Switch 198

Implementing Hardware-Based CoPP 200

Configuring Hardware-Based CoPP on the Catalyst 6500 200

Hardware Rate Limiters 201

Hardware-Based CoPP 203

Configuring Control Plane Security on the Cisco ME3400 203

Implementing Software-Based CoPP 206

Configuring Software-Based CoPP 207

Mitigating Attacks Using CoPP 211

Mitigating Attacks on the Catalyst 6500 Switch 211

Telnet Flooding Without CoPP 211

Telnet Flooding with CoPP 212

TTL Expiry Attack 215

Mitigating Attacks on Cisco ME3400 Series Switches 218

CDP Flooding 218

CDP Flooding with L2TP Tunneling 219

Summary 222

References 222

Chapter 14

Disabling Control Plane Protocols 225

Configuring Switches Without Control Plane Protocols 225

Safely Disabling Control Plane Activities 227

Disabling STP 227

Disabling Link Aggregation Protocols 228

Disabling VTP 228

Disabling DTP 228

Disabling Hot Standby Routing Protocol and Virtual Routing Redundancy

Protocol 228

Disabling Management Protocols and Routing Protocols 229

Using an ACL 230

Disabling Other Control Plane Activities 232

Generating ICMP Messages 232

Controlling CDP, IPv6, and IEEE 802.1X 233

Using Smartports Macros 234

Control Plane Activities That Cannot Be Disabled 235

Best Practices for Control Plane 236

Summary 236

Chapter 15

Using Switches to Detect a Data Plane DoS 239

Detecting DoS with NetFlow 239

Enabling NetFlow on a Catalyst 6500 244

NetFlow as a Security Tool 246

Increasing Security with NetFlow Applications 247

Securing Networks with RMON 249

Other Techniques That Detect Active Worms 252

Summary 255

References 255

Part III

Using Switches to Augment the Network Security 257

Chapter 16

Wire Speed Access Control Lists 259

ACLs or Firewalls? 260

State or No State? 261

Protecting the Infrastructure Using ACLs 261

RACL, VACL, and PACL: Many Types of ACLs 263

Working with RACL 264

Working with VACL 265

Working with PACL 267

Technology Behind Fast ACL Lookups 267

Exploring TCAM 268

Summary 270

Chapter 17

Identity-Based Networking Services with 802.1X 273

Foundation 273

Basic Identity Concepts 274

Identification 274

Authentication 274

Authorization 275

Discovering Extensible Authentication Protocol 275

Exploring IEEE 802.1X 277

802.1X Security 279

Integration Value-Add of 802.1X 281

Spanning-Tree Considerations 281

Trunking Considerations 283

Information Leaks 283

Keeping Insiders Honest 285

Port-Security Integration 285

DHCP-Snooping Integration 286

Address Resolution Protocol Inspection Integration 286

Putting It Together 287

Working with Multiple Devices 288

Single-Auth Mode 288

Multihost Mode 289

商品描述(中文翻譯)

描述

LAN Switch Security: What Hackers Know About Your Switches

一本實用指南,教你如何加固第二層設備並阻止校園網路攻擊。

作者:Eric Vyncke
Christopher Paggen, CCIE® No. 2659

與一般觀念相反,乙太網路交換器並不具備內在的安全性。乙太網路交換器的安全漏洞有很多:從交換器實作、控制平面協定(如生成樹協定 [STP]、Cisco® Discovery Protocol [CDP] 等)到數據平面協定,例如位址路由協定(ARP)或動態主機組態協定(DHCP)。《LAN Switch Security》解釋了與乙太網路交換器相關的網路基礎架構中的所有漏洞。此外,本書還向您展示如何配置交換器以防止或減輕基於這些漏洞的攻擊。本書還包括一節介紹如何使用乙太網路交換器來增強網路安全並防止未來的攻擊。

《LAN Switch Security》分為四個部分,為您提供確保第二層設備上的語音和數據流量完整性的步驟。第一部分介紹了第二層協定的漏洞以及如何配置交換器以防止對這些漏洞的攻擊。第二部分介紹了針對乙太網路交換器的阻斷服務(DoS)攻擊,並展示了如何減輕這些攻擊。第三部分展示了如何通過使用線速存取控制清單(ACL)處理和IEEE 802.1x進行用戶身份驗證和授權,實際上增強網路的安全性。第四部分探討了IEEE的LinkSec工作組未來的發展。對於所有部分,大部分內容都與供應商無關,對於部署乙太網路交換器的所有網路架構師都有用。

閱讀完本書後,您將深入了解局域網安全並準備好填補校園網路中存在的安全漏洞。

Eric Vyncke擁有比利時Liege大學的計算機科學工程碩士學位。自1997年以來,Eric一直在思科擔任卓越諮詢工程師,負責歐洲地區的安全技術顧問工作。他在過去20年的專業領域主要是從第二層到應用層的安全。他還是比利時大學的客座教授,負責安全研討會。

Christopher Paggen, CCIE® No. 2659,獲得比利時Liege的IESSL計算機科學學位和比利時Mons-Hainaut大學的經濟學碩士學位。自1996年以來,他一直在思科工作,曾擔任LAN交換和安全領域的各種職位,包括售前支援、售後支援、網路設計工程師或各種工程團隊的技術顧問。Christopher經常在活動中發表演講,並在安全領域申請了幾項美國專利。

貢獻作者:
Jason Frazier是思科技術系統工程組的技術領導者。