An Introduction to Compressible Flow
Ames, Forrest E., Tang, Clement C.
- 出版商: CRC
- 出版日期: 2023-07-24
- 售價: $2,380
- 貴賓價: 9.5 折 $2,261
- 語言: 英文
- 頁數: 284
- 裝訂: Quality Paper - also called trade paper
- ISBN: 0367697793
- ISBN-13: 9780367697792
海外代購書籍(需單獨結帳)
相關主題
商品描述
An Introduction to Compressible Flow, Second Edition covers the material typical of a single-semester course in compressible flow. The book begins with a brief review of thermodynamics and control volume fluid dynamics, then proceeds to cover isentropic flow, normal shock waves, shock tubes, oblique shock waves, Prandtl-Meyer expansion fans, Fanno-line flow, Rayleigh-line flow, and conical shock waves.
The book includes a chapter on linearized flow following chapters on oblique shocks and Prandtl-Meyer flows to appropriately ground students in this approximate method. It includes detailed appendices to support problem solutions and covers new oblique shock tables, which allow for quick and accurate solutions of flows with concave corners.
The book is intended for senior undergraduate engineering students studying thermal-fluids and practicing engineers in the areas of aerospace or energy conversion. This book is also useful in providing supplemental coverage of compressible flow material in gas turbine and aerodynamics courses.
商品描述(中文翻譯)
《可壓縮流體力學導論，第二版》涵蓋了一學期可壓縮流體力學課程的典型內容。本書首先簡要回顧熱力學和控制體流體力學，然後介紹等熵流、正常激波、激波管、斜激波、普朗特-邁爾擴張扇、范諾線流、雷利線流和錐形激波。
本書在介紹斜激波和普朗特-邁爾流之後，還包括了一章關於線性化流的內容，以適當地為學生提供這種近似方法的基礎。它還包含詳細的附錄，以支持問題解答，並涵蓋了新的斜激波表，可快速準確地解決具有凹角的流動問題。
本書面向高年級本科工程學生，專攻熱流體力學，以及航空航天或能源轉換領域的實踐工程師。本書還可作為燃氣輪機和空氣動力學課程中可壓縮流體力學材料的補充教材。
作者簡介
Forrest Ames has been Professor of Mechanical Engineering at the University of North Dakota (UND) for the last 22 years. Dr. Ames began his career at Allison Gas Turbine Div. of General Motors where he worked in the research laboratories. Dr. Ames has conducted research in the area of gas turbine heat transfer and aerodynamics for over 35 years. At UND, Dr. Ames is responsible for teaching in the thermal fluids area of mechanical engineering and regularly teaches classes on compressible flow, aerodynamics, gas turbines, thermodynamics, computational fluid dynamics, convective heat transfer and fluid dynamics. Dr. Ames has been a member of the Heat Transfer Committee of the International Gas Turbine Institute for over 20 years. He has been a regular contributor to ASME Turbo Expo technical sessions as author, presenter, reviewer and session organizer in the areas of turbine aerodynamics and heat transfer. He is a Fellow of the ASME.
Clement Tang is an Associate Professor of Mechanical Engineering at the University of North Dakota (UND). He joined UND as a faculty member in 2011. Dr. Tang has research experience in the area of multiphase flow heat transfer and aerodynamics of thin flexible materials. He has been conducting experimental research in gas-liquid two-phase flow heat transfer for over 15 years. At UND, Dr. Tang has taught compressible flow, heat and mass transfer, heat conduction & radiation, HVAC, mechanical measurements, multiphase flow heat transfer, and thermodynamics.
作者簡介(中文翻譯)
Forrest Ames在過去的22年中一直擔任北達科他大學(UND)機械工程學教授。Ames博士在通用汽車的Allison Gas Turbine Div.研究實驗室開始了他的職業生涯。Ames博士在燃氣渦輪熱傳和空氣動力學領域進行了超過35年的研究。在UND，Ames博士負責教授機械工程中的熱流體領域，並經常教授壓縮流、空氣動力學、燃氣渦輪、熱力學、計算流體力學、對流熱傳和流體力學等課程。Ames博士已經是國際燃氣渦輪學會熱傳委員會的成員超過20年。他在ASME Turbo Expo技術會議上作為作者、演講者、審稿人和會議組織者在渦輪空氣動力學和熱傳領域做出了貢獻。他是ASME的會士。
Clement Tang是北達科他大學(UND)機械工程學的副教授。他於2011年加入UND擔任教職。Tang博士在多相流體熱傳和薄柔性材料空氣動力學領域有研究經驗。他在氣液兩相流體熱傳方面進行了超過15年的實驗研究。在UND，Tang博士教授壓縮流、熱傳和質量傳遞、熱傳導和輻射、暖通空調、機械測量、多相流體熱傳和熱力學等課程。
